Dating garrard 401

dating garrard 401

How many speeds does a Garrard 401 have?

The Garrard 401 was introduced to replace the Garrard 301. 1965: Garrard SP25 introduced, It had four speeds; 16, 33⅓, 45 and 78RPM. The SP25 was probably the most popular model Garrard ever produced. All the SP25s from the first to the fourth (which surfaced in 1974) were largely the same.

When did the Garrard 301 come out?

Production of the 301 started in 1953; it hit the market in 1954. The 301 was usually sold without a plinth, tonearm or cartridge. The strobe-rim platter was around a £2 extra-cost option. There were two schedules of the Garrard 301.

When did Garrard pickups come out?

1957: Garrard released one of the first stereo pickups when stereophonic records were introduced. 1958: A serious factory fire occurred on March 21, 1958, but production was restored with the help of a neighbouring company, Plessey, which loaned factory space.

What happened to Garrard turntables?

In 1979, Plessey sold Garrard to Gradiente Electronics of Brazil and their turntable series production was moved to Brazil (Manaus). The remaining Garrard research and development operation in Swindon was reduced to a skeleton operation until completely shut down in 1992.

What is a Garrard 401?

The Garrard 401 which operates at three standard speed is produced to the highest technical specification to meet the most exacting requirements of radio, television and recording studios as well as for high-fidelity enthusiasts.

How much is a Garrard 401 turntable worth?

The Garrard 401 is not exactly cheap, however, and you can expect to pay at least 500 USD, with good condition 401s fetching over $1000 on Ebay. For an excellent quality turntable, that is pretty good bang for buck, but these dinosaurs often need restorations.

Which is better Garrard 401 or gyro se?

As Dominic says, the Garrard 401 is better than any of those decks. I have both a Garrard 401 and a Gyro SE. The Gyro IMHO is better. This is one of those debates that could go on forever as there are other considerations such as how both decks are set up, what sort of plinth the Garrard has and what tonearm/cart is being used on both.

What is the best tonearm length for the Garrard 401?

The ideal tonearm length for the Garrard 401 is 12″. A tonearm from SME (the 3009 is a classic pairing), a Jelco or a Thomas Shick if you can afford it! The cartridge will depend on the tonearm, but for the most popular SME 3009, the high compliance cartridges like the Shure V15 or the Ortofon 2m work well.

Who made Garrard turntables?

The Garrard Engineering and Manufacturing Company of Swindon, Wiltshire, was a British company that was famous for producing high-quality gramophone turntables. It was formed by the jewellers Garrard & Co in 1915. The company was sold to Plessey, an electronics conglomerate, in 1960.

How old is a Garrard 401 turntable?

The Garrard 401 was produced in 1965 to replace the 401 (it never quite achieved this feat, according to the opinions of some). Garrard turntables are cult icons that are still being refurbished today.

What kind of tonearm does a Garrard turntable use?

Garrard 401 turntable with SME 3009 tonearm. The Garrard 301 Transcription Turntable was the first transcription turntable that supported all extant commercial playback formats – the 33, 45 and 78 rpm records of the time. The first model was the Garrard 301. Oil and grease bearing versions were made.

What happened to Garrard audio?

The remaining Garrard research and development operation in Swindon was reduced to a skeleton operation until completely shut down in 1992. Then, Gradiente licensed the Garrard name to Terence OSullivan, who operated as Loricraft Audio, in 1997.

Related posts: